How to Use Sandbags to Prevent Flooding and Storm Damage in the Houston Area
Filling Your Sandbags
It is recommended that you use sand to fill your bags with, however if it is not readily available soil will work too. When filling your bags, you want to fill them just slightly more than half-full so they lay flatter, are easier to stack, and are lighter to move. Bags are much easier to handle if they are no more than 40 pounds when filled, although this may vary depending on the size of the bag (typical bags for sand-filling are 24-26 inches long by 14 inches wide).
Stacking Sandbags in the Conroe Area
One factor to keep in mind when protecting your home and property in the event of a flood is that sandbags are simply meant to divert water and debris away from the home, but do not create a water-tight seal. Proper placement will, however, significantly reduce the amount of water that seeps in.
First, you will need to prepare the site where the bags will be placed. You should clear the area where they’ll be placed by removing debris such as large sticks, ice, and snow etc. These may cause gaps in your structure. Your barrier won’t serve you any good if the ground is too slippery and your sandbags all slide away when the water flows so you need to be sure there is enough friction to keep them in place.
If your home has experienced flooding, please call SERVPRO of Lake Conroe, Magnolia, and Cleveland right away, as time is a factor. The professionals at SERVPRO of Lake Conroe, Magnolia, and Cleveland offer emergency services 24/7. Here to Help.
Source: Chainsaw Journal Jan 2020.